What’s Included:
• Power Adapter
• Lithium Battery Charging Base
• Lithium Battery
• ULV Nozzle
• Shoulder Strap
• Nozzle Cleaning Pin
Pressure Release Valve
Horizontal Setting
No Spray
Vertical Setting
Spray
Fully Charge the Battery
Before Installing
Attach the Fully
Charged Battery
Fill Reservoir ONLY With
EnviroNize® Solutions
Do
1. Only use EnviroNize® Solutions to maintain warranty.
2. ALWAYS Follow END of DAY MAINTENANCE (After Use) procedures.
3. To maintain battery life always store unit with a fully charged battery when not in use > 5 days. Recharge monthly if not used.
Don't
1. DO NOT USE ANY CORROSSIVE SOLUTIONS.
2. DO NOT USE ANY OTHER BATTERY MODEL.
3. DO NOT USE if: Motor Stops Suddenly, Solution gets into the device, any malfunction occurs.
Cleaning and Maintaining
Nozzle Spray Performance
Nozzle Cleaning
Pin Jacket
To use, pull out the Nozzle
Cleaning Pin from the jacket
Flushing the Device
1. Start the device and flush with clean water for 30 seconds to clear any EnviroNize® Solution from the orifice
2. Empty any remaining water used for flushing and store for future use
End of Day Maintenance (After Use)
Empty any remaining
EnviroNize® Solution back
into its original container
Prepare Device for Flushing:
Refill the Reservoir Tank to
1/3 with Clean Potable Water
Gently insert without bending the pin into the nozzle orifice.
1. Removes any scale build up inside the orifice.
2. Removes any foreign particle lodged inside the orifice.
OEM Parts | Service | Warranty
SERVICE
service@environize.ca
WARRANTY
Refer to Limited Warranty
